diff --git a/kitty/.config/kitty/kitty.conf b/kitty/.config/kitty/kitty.conf new file mode 100644 index 0000000..07a5e6b --- /dev/null +++ b/kitty/.config/kitty/kitty.conf @@ -0,0 +1,1384 @@ +# vimileencoding=utf-8:foldmethod=marker + + #: Fonts {{{ + + #: kitty has very powerful font management. You can configure + #: individual font faces and even specify special fonts for particular + #: characters. + + font_family Cascadia Code + bold_font Cascadia Code + italic_font Cascadia Code + bold_italic_font Cascadia Code + + #: You can specify different fonts for the bold/italic/bold-italic + #: variants. To get a full list of supported fonts use the `kitty + #: list-fonts` command. By default they are derived automatically, by + #: the OSes font system. Setting them manually is useful for font + #: families that have many weight variants like Book, Medium, Thick, + #: etc. For example:: + + #: font_family Operator Mono Book + #: bold_font Operator Mono Medium + #: italic_font Operator Mono Book Italic + #: bold_italic_font Operator Mono Medium Italic + + font_size 11.0 + + #: Font size (in pts) + + force_ltr no + + #: kitty does not support BIDI (bidirectional text), however, for RTL + #: scripts, words are automatically displayed in RTL. That is to say, + #: in an RTL script, the words "HELLO WORLD" display in kitty as + #: "WORLD HELLO", and if you try to select a substring of an RTL- + #: shaped string, you will get the character that would be there had + #: the the string been LTR. For example, assuming the Hebrew word + #: ירושלים, selecting the character that on the screen appears to be ם + #: actually writes into the selection buffer the character י. kitty's + #: default behavior is useful in conjunction with a filter to reverse + #: the word order, however, if you wish to manipulate RTL glyphs, it + #: can be very challenging to work with, so this option is provided to + #: turn it off. Furthermore, this option can be used with the command + #: line program GNU FriBidi + #: to get BIDI + #: support, because it will force kitty to always treat the text as + #: LTR, which FriBidi expects for terminals. + + adjust_line_height 0 + adjust_column_width 0 + + #: Change the size of each character cell kitty renders. You can use + #: either numbers, which are interpreted as pixels or percentages + #: (number followed by %), which are interpreted as percentages of the + #: unmodified values. You can use negative pixels or percentages less + #: than 100% to reduce sizes (but this might cause rendering + #: artifacts). + + adjust_baseline 0 + + #: Adjust the vertical alignment of text (the height in the cell at + #: which text is positioned). You can use either numbers, which are + #: interpreted as pixels or a percentages (number followed by %), + #: which are interpreted as the percentage of the line height. A + #: positive value moves the baseline up, and a negative value moves + #: them down. The underline and strikethrough positions are adjusted + #: accordingly. + + # symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols + + #: Map the specified unicode codepoints to a particular font. Useful + #: if you need special rendering for some symbols, such as for + #: Powerline. Avoids the need for patched fonts. Each unicode code + #: point is specified in the form U+. You + #: can specify multiple code points, separated by commas and ranges + #: separated by hyphens. symbol_map itself can be specified multiple + #: times. Syntax is:: + + #: symbol_map codepoints Font Family Name + + disable_ligatures never + + #: Choose how you want to handle multi-character ligatures. The + #: default is to always render them. You can tell kitty to not render + #: them when the cursor is over them by using cursor to make editing + #: easier, or have kitty never render them at all by using always, if + #: you don't like them. The ligature strategy can be set per-window + #: either using the kitty remote control facility or by defining + #: shortcuts for it in kitty.conf, for example:: + + #: map alt+1 disable_ligatures_in active always + #: map alt+2 disable_ligatures_in all never + #: map alt+3 disable_ligatures_in tab cursor + + #: Note that this refers to programming ligatures, typically + #: implemented using the calt OpenType feature. For disabling general + #: ligatures, use the font_features setting. + + # font_features none + + #: Choose exactly which OpenType features to enable or disable. This + #: is useful as some fonts might have features worthwhile in a + #: terminal. For example, Fira Code Retina includes a discretionary + #: feature, zero, which in that font changes the appearance of the + #: zero (0), to make it more easily distinguishable from Ø. Fira Code + #: Retina also includes other discretionary features known as + #: Stylistic Sets which have the tags ss01 through ss20. + + #: For the exact syntax to use for individual features, see the + #: Harfbuzz documentation . + + #: Note that this code is indexed by PostScript name, and not the font + #: family. This allows you to define very precise feature settings; + #: e.g. you can disable a feature in the italic font but not in the + #: regular font. + + #: On Linux, these are read from the FontConfig database first and + #: then this, setting is applied, so they can be configured in a + #: single, central place. + + #: To get the PostScript name for a font, use kitty + list-fonts + #: --psnames: + + #: .. code-block:: sh + + #: $ kitty + list-fonts --psnames | grep Fira + #: Fira Code + #: Fira Code Bold (FiraCode-Bold) + #: Fira Code Light (FiraCode-Light) + #: Fira Code Medium (FiraCode-Medium) + #: Fira Code Regular (FiraCode-Regular) + #: Fira Code Retina (FiraCode-Retina) + + #: The part in brackets is the PostScript name. + + #: Enable alternate zero and oldstyle numerals:: + + #: font_features FiraCode-Retina +zero +onum + + #: Enable only alternate zero:: + + #: font_features FiraCode-Retina +zero + + #: Disable the normal ligatures, but keep the calt feature which (in + #: this font) breaks up monotony:: + + #: font_features TT2020StyleB-Regular -liga +calt + + #: In conjunction with force_ltr, you may want to disable Arabic + #: shaping entirely, and only look at their isolated forms if they + #: show up in a document. You can do this with e.g.:: + + #: font_features UnifontMedium +isol -medi -fina -init + + box_drawing_scale 0.001, 1, 1.5, 2 + + #: Change the sizes of the lines used for the box drawing unicode + #: characters These values are in pts. They will be scaled by the + #: monitor DPI to arrive at a pixel value. There must be four values + #: corresponding to thin, normal, thick, and very thick lines. + + #: }}} + + #: Cursor customization {{{ + + cursor #cccccc + + #: Default cursor color + + cursor_text_color #111111 + + #: Choose the color of text under the cursor. If you want it rendered + #: with the background color of the cell underneath instead, use the + #: special keyword: background + + cursor_shape block + + #: The cursor shape can be one of (block, beam, underline). Note that + #: when reloading the config this will be changed only if the cursor + #: shape has not been set by the program running in the terminal. + + cursor_beam_thickness 1.5 + + #: Defines the thickness of the beam cursor (in pts) + + cursor_underline_thickness 2.0 + + #: Defines the thickness of the underline cursor (in pts) + + cursor_blink_interval -1 + + #: The interval (in seconds) at which to blink the cursor. Set to zero + #: to disable blinking. Negative values mean use system default. Note + #: that numbers smaller than repaint_delay will be limited to + #: repaint_delay. + + cursor_stop_blinking_after 15.0 + + #: Stop blinking cursor after the specified number of seconds of + #: keyboard inactivity. Set to zero to never stop blinking. + + #: }}} + + #: Scrollback {{{ + + scrollback_lines 2000 + + #: Number of lines of history to keep in memory for scrolling back. + #: Memory is allocated on demand. Negative numbers are (effectively) + #: infinite scrollback. Note that using very large scrollback is not + #: recommended as it can slow down performance of the terminal and + #: also use large amounts of RAM. Instead, consider using + #: scrollback_pager_history_size. Note that on config reload if this + #: is changed it will only affect newly created windows, not existing + #: ones. + + scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER + + #: Program with which to view scrollback in a new window. The + #: scrollback buffer is passed as STDIN to this program. If you change + #: it, make sure the program you use can handle ANSI escape sequences + #: for colors and text formatting. INPUT_LINE_NUMBER in the command + #: line above will be replaced by an integer representing which line + #: should be at the top of the screen. Similarly CURSOR_LINE and + #: CURSOR_COLUMN will be replaced by the current cursor position. + + scrollback_pager_history_size 0 + + #: Separate scrollback history size, used only for browsing the + #: scrollback buffer (in MB). This separate buffer is not available + #: for interactive scrolling but will be piped to the pager program + #: when viewing scrollback buffer in a separate window. The current + #: implementation stores the data in UTF-8, so approximatively 10000 + #: lines per megabyte at 100 chars per line, for pure ASCII text, + #: unformatted text. A value of zero or less disables this feature. + #: The maximum allowed size is 4GB. Note that on config reload if this + #: is changed it will only affect newly created windows, not existing + #: ones. + + scrollback_fill_enlarged_window no + + #: Fill new space with lines from the scrollback buffer after + #: enlarging a window. + + wheel_scroll_multiplier 5.0 + + #: Modify the amount scrolled by the mouse wheel. Note this is only + #: used for low precision scrolling devices, not for high precision + #: scrolling on platforms such as macOS and Wayland. Use negative + #: numbers to change scroll direction. + + touch_scroll_multiplier 1.0 + + #: Modify the amount scrolled by a touchpad. Note this is only used + #: for high precision scrolling devices on platforms such as macOS and + #: Wayland. Use negative numbers to change scroll direction. + + #: }}} + + #: Mouse {{{ + + mouse_hide_wait 3.0 + + #: Hide mouse cursor after the specified number of seconds of the + #: mouse not being used. Set to zero to disable mouse cursor hiding. + #: Set to a negative value to hide the mouse cursor immediately when + #: typing text. Disabled by default on macOS as getting it to work + #: robustly with the ever-changing sea of bugs that is Cocoa is too + #: much effort. + + url_color #0087bd + url_style curly + + #: The color and style for highlighting URLs on mouse-over. url_style + #: can be one of: none, single, double, curly + + open_url_with default + + #: The program with which to open URLs that are clicked on. The + #: special value default means to use the operating system's default + #: URL handler. + + url_prefixes http https file ftp gemini irc gopher mailto news git + + #: The set of URL prefixes to look for when detecting a URL under the + #: mouse cursor. + + detect_urls yes + + #: Detect URLs under the mouse. Detected URLs are highlighted with an + #: underline and the mouse cursor becomes a hand over them. Even if + #: this option is disabled, URLs are still clickable. + + url_excluded_characters + + #: Additional characters to be disallowed from URLs, when detecting + #: URLs under the mouse cursor. By default, all characters legal in + #: URLs are allowed. + + copy_on_select no + + #: Copy to clipboard or a private buffer on select. With this set to + #: clipboard, simply selecting text with the mouse will cause the text + #: to be copied to clipboard. Useful on platforms such as macOS that + #: do not have the concept of primary selections. You can instead + #: specify a name such as a1 to copy to a private kitty buffer + #: instead. Map a shortcut with the paste_from_buffer action to paste + #: from this private buffer. For example:: + + #: map cmd+shift+v paste_from_buffer a1 + + #: Note that copying to the clipboard is a security risk, as all + #: programs, including websites open in your browser can read the + #: contents of the system clipboard. + + strip_trailing_spaces never + + #: Remove spaces at the end of lines when copying to clipboard. A + #: value of smart will do it when using normal selections, but not + #: rectangle selections. always will always do it. + + select_by_word_characters @-./_~?&=%+# + + #: Characters considered part of a word when double clicking. In + #: addition to these characters any character that is marked as an + #: alphanumeric character in the unicode database will be matched. + + click_interval -1.0 + + #: The interval between successive clicks to detect double/triple + #: clicks (in seconds). Negative numbers will use the system default + #: instead, if available, or fallback to 0.5. + + focus_follows_mouse no + + #: Set the active window to the window under the mouse when moving the + #: mouse around + + pointer_shape_when_grabbed arrow + + #: The shape of the mouse pointer when the program running in the + #: terminal grabs the mouse. Valid values are: arrow, beam and hand + + default_pointer_shape beam + + #: The default shape of the mouse pointer. Valid values are: arrow, + #: beam and hand + + pointer_shape_when_dragging beam + + #: The default shape of the mouse pointer when dragging across text. + #: Valid values are: arrow, beam and hand + + #: Mouse actions {{{ + + #: Mouse buttons can be remapped to perform arbitrary actions. The + #: syntax for doing so is: + + #: .. code-block:: none + + #: mouse_map button-name event-type modes action + + #: Where ``button-name`` is one of ``left``, ``middle``, ``right`` or + #: ``b1 ... b8`` with added keyboard modifiers, for example: + #: ``ctrl+shift+left`` refers to holding the ctrl+shift keys while + #: clicking with the left mouse button. The number ``b1 ... b8`` can + #: be used to refer to upto eight buttons on a mouse. + + #: ``event-type`` is one ``press``, ``release``, ``doublepress``, + #: ``triplepress``, ``click`` and ``doubleclick``. ``modes`` + #: indicates whether the action is performed when the mouse is grabbed + #: by the program running in the terminal, or not. It can have one or + #: more or the values, ``grabbed,ungrabbed``. ``grabbed`` refers to + #: when the program running in the terminal has requested mouse + #: events. Note that the click and double click events have a delay of + #: click_interval to disambiguate from double and triple presses. + + #: You can run kitty with the kitty --debug-input command line option + #: to see mouse events. See the builtin actions below to get a sense + #: of what is possible. + + #: If you want to unmap an action map it to ``no-op``. For example, to + #: disable opening of URLs with a plain click:: + + #: mouse_map left click ungrabbed no-op + + #: .. note:: + #: Once a selection is started, releasing the button that started it will + #: automatically end it and no release event will be dispatched. + + clear_all_mouse_actions no + + #: You can have kitty remove all mouse actions seen up to this point. + #: Useful, for instance, to remove the default mouse actions. + + mouse_map left click ungrabbed mouse_click_url_or_select + mouse_map shift+left click grabbed,ungrabbed mouse_click_url_or_select + mouse_map ctrl+shift+left release grabbed,ungrabbed mouse_click_url + + #: Variant with ctrl+shift is present because the simple click based + #: version has an unavoidable delay of click_interval, to disambiguate + #: clicks from double clicks. + + mouse_map ctrl+shift+left press grabbed discard_event + + #: Prevent this press event from being sent to the program that has + #: grabbed the mouse, as the corresponding release event is used to + #: open a URL. + + mouse_map middle release ungrabbed paste_from_selection + mouse_map left press ungrabbed mouse_selection normal + mouse_map ctrl+alt+left press ungrabbed mouse_selection rectangle + mouse_map left doublepress ungrabbed mouse_selection word + mouse_map left triplepress ungrabbed mouse_selection line + + #: Select the entire line + + mouse_map ctrl+alt+left triplepress ungrabbed mouse_selection line_from_point + + #: Select from the clicked point to the end of the line + + mouse_map right press ungrabbed mouse_selection extend + + #: If you want only the end of the selection to be moved instead of + #: the nearest boundary, use move-end instead of extend. + + mouse_map shift+middle release ungrabbed,grabbed paste_selection + mouse_map shift+left press ungrabbed,grabbed mouse_selection normal + mouse_map shift+ctrl+alt+left press ungrabbed,grabbed mouse_selection rectangle + mouse_map shift+left doublepress ungrabbed,grabbed mouse_selection word + mouse_map shift+left triplepress ungrabbed,grabbed mouse_selection line + + #: Select the entire line + + mouse_map shift+ctrl+alt+left triplepress ungrabbed,grabbed mouse_selection line_from_point + + #: Select from the clicked point to the end of the line + + mouse_map shift+right press ungrabbed,grabbed mouse_selection extend + #: }}} + + #: }}} + + #: Performance tuning {{{ + + repaint_delay 10 + + #: Delay (in milliseconds) between screen updates. Decreasing it, + #: increases frames-per-second (FPS) at the cost of more CPU usage. + #: The default value yields ~100 FPS which is more than sufficient for + #: most uses. Note that to actually achieve 100 FPS you have to either + #: set sync_to_monitor to no or use a monitor with a high refresh + #: rate. Also, to minimize latency when there is pending input to be + #: processed, repaint_delay is ignored. + + input_delay 3 + + #: Delay (in milliseconds) before input from the program running in + #: the terminal is processed. Note that decreasing it will increase + #: responsiveness, but also increase CPU usage and might cause flicker + #: in full screen programs that redraw the entire screen on each loop, + #: because kitty is so fast that partial screen updates will be drawn. + + sync_to_monitor yes + + #: Sync screen updates to the refresh rate of the monitor. This + #: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing) + #: when scrolling. However, it limits the rendering speed to the + #: refresh rate of your monitor. With a very high speed mouse/high + #: keyboard repeat rate, you may notice some slight input latency. If + #: so, set this to no. + + #: }}} + + #: Terminal bell {{{ + + enable_audio_bell yes + + #: Enable/disable the audio bell. Useful in environments that require + #: silence. + + visual_bell_duration 0.0 + + #: Visual bell duration. Flash the screen when a bell occurs for the + #: specified number of seconds. Set to zero to disable. + + window_alert_on_bell yes + + #: Request window attention on bell. Makes the dock icon bounce on + #: macOS or the taskbar flash on linux. + + bell_on_tab yes + + #: Show a bell symbol on the tab if a bell occurs in one of the + #: windows in the tab and the window is not the currently focused + #: window + + command_on_bell none + + #: Program to run when a bell occurs. The environment variable + #: KITTY_CHILD_CMDLINE can be used to get the program running in the + #: window in which the bell occurred. + + #: }}} + + #: Window layout {{{ + + remember_window_size yes + initial_window_width 640 + initial_window_height 400 + + #: If enabled, the window size will be remembered so that new + #: instances of kitty will have the same size as the previous + #: instance. If disabled, the window will initially have size + #: configured by initial_window_width/height, in pixels. You can use a + #: suffix of "c" on the width/height values to have them interpreted + #: as number of cells instead of pixels. + + enabled_layouts * + + #: The enabled window layouts. A comma separated list of layout names. + #: The special value all means all layouts. The first listed layout + #: will be used as the startup layout. Default configuration is all + #: layouts in alphabetical order. For a list of available layouts, see + #: the https://sw.kovidgoyal.net/kitty/overview/#layouts. + + window_resize_step_cells 2 + window_resize_step_lines 2 + + #: The step size (in units of cell width/cell height) to use when + #: resizing windows. The cells value is used for horizontal resizing + #: and the lines value for vertical resizing. + + window_border_width 0.5pt + + #: The width of window borders. Can be either in pixels (px) or pts + #: (pt). Values in pts will be rounded to the nearest number of pixels + #: based on screen resolution. If not specified the unit is assumed to + #: be pts. Note that borders are displayed only when more than one + #: window is visible. They are meant to separate multiple windows. + + draw_minimal_borders yes + + #: Draw only the minimum borders needed. This means that only the + #: minimum needed borders for inactive windows are drawn. That is only + #: the borders that separate the inactive window from a neighbor. Note + #: that setting a non-zero window margin overrides this and causes all + #: borders to be drawn. + + window_margin_width 0 + + #: The window margin (in pts) (blank area outside the border). A + #: single value sets all four sides. Two values set the vertical and + #: horizontal sides. Three values set top, horizontal and bottom. Four + #: values set top, right, bottom and left. + + single_window_margin_width -1 + + #: The window margin (in pts) to use when only a single window is + #: visible. Negative values will cause the value of + #: window_margin_width to be used instead. A single value sets all + #: four sides. Two values set the vertical and horizontal sides. Three + #: values set top, horizontal and bottom. Four values set top, right, + #: bottom and left. + + window_padding_width 0 + + #: The window padding (in pts) (blank area between the text and the + #: window border). A single value sets all four sides. Two values set + #: the vertical and horizontal sides. Three values set top, horizontal + #: and bottom. Four values set top, right, bottom and left. + + placement_strategy center + + #: When the window size is not an exact multiple of the cell size, the + #: cell area of the terminal window will have some extra padding on + #: the sides. You can control how that padding is distributed with + #: this option. Using a value of center means the cell area will be + #: placed centrally. A value of top-left means the padding will be on + #: only the bottom and right edges. + + active_border_color #00ff00 + + #: The color for the border of the active window. Set this to none to + #: not draw borders around the active window. + + inactive_border_color #cccccc + + #: The color for the border of inactive windows + + bell_border_color #ff5a00 + + #: The color for the border of inactive windows in which a bell has + #: occurred + + inactive_text_alpha 1.0 + + #: Fade the text in inactive windows by the specified amount (a number + #: between zero and one, with zero being fully faded). + + hide_window_decorations yes + + #: Hide the window decorations (title-bar and window borders) with + #: yes. On macOS, titlebar-only can be used to only hide the titlebar. + #: Whether this works and exactly what effect it has depends on the + #: window manager/operating system. Note that the effects of changing + #: this setting when reloading config are undefined. + + resize_debounce_time 0.1 + + #: The time (in seconds) to wait before redrawing the screen when a + #: resize event is received. On platforms such as macOS, where the + #: operating system sends events corresponding to the start and end of + #: a resize, this number is ignored. + + resize_draw_strategy static + + #: Choose how kitty draws a window while a resize is in progress. A + #: value of static means draw the current window contents, mostly + #: unchanged. A value of scale means draw the current window contents + #: scaled. A value of blank means draw a blank window. A value of size + #: means show the window size in cells. + + resize_in_steps no + + #: Resize the OS window in steps as large as the cells, instead of + #: with the usual pixel accuracy. Combined with an + #: initial_window_width and initial_window_height in number of cells, + #: this option can be used to keep the margins as small as possible + #: when resizing the OS window. Note that this does not currently work + #: on Wayland. + + confirm_os_window_close 0 + + #: Ask for confirmation when closing an OS window or a tab that has at + #: least this number of kitty windows in it. A value of zero disables + #: confirmation. This confirmation also applies to requests to quit + #: the entire application (all OS windows, via the quit action). + + #: }}} + + #: Tab bar {{{ + + tab_bar_edge bottom + + #: Which edge to show the tab bar on, top or bottom + + tab_bar_margin_width 0.0 + + #: The margin to the left and right of the tab bar (in pts) + + tab_bar_margin_height 0.0 0.0 + + #: The margin above and below the tab bar (in pts). The first number + #: is the margin between the edge of the OS Window and the tab bar and + #: the second number is the margin between the tab bar and the + #: contents of the current tab. + + tab_bar_style fade + + #: The tab bar style, can be one of: + + #: fade + #: Each tab's edges fade into the background color (see tab_fade) + #: slant + #: Tabs look like the tabs in a physical file + #: separator + #: Tabs are separated by a configurable separator (see tab_separator) + #: powerline + #: Tabs are shown as a continuous line with "fancy" separators (see tab_powerline_style) + #: hidden + #: The tab bar is hidden. If you use this, you might want to create a mapping + #: for the https://sw.kovidgoyal.net/kitty/actions/#select-tab action which presents you with a list + #: of tabs and allows for easy switching to a tab. + + tab_bar_min_tabs 2 + + #: The minimum number of tabs that must exist before the tab bar is + #: shown + + tab_switch_strategy previous + + #: The algorithm to use when switching to a tab when the current tab + #: is closed. The default of previous will switch to the last used + #: tab. A value of left will switch to the tab to the left of the + #: closed tab. A value of right will switch to the tab to the right of + #: the closed tab. A value of last will switch to the right-most tab. + + tab_fade 0.25 0.5 0.75 1 + + #: Control how each tab fades into the background when using fade for + #: the tab_bar_style. Each number is an alpha (between zero and one) + #: that controls how much the corresponding cell fades into the + #: background, with zero being no fade and one being full fade. You + #: can change the number of cells used by adding/removing entries to + #: this list. + + tab_separator " ┇" + + #: The separator between tabs in the tab bar when using separator as + #: the tab_bar_style. + + tab_powerline_style angled + + #: The powerline separator style between tabs in the tab bar when + #: using powerline as the tab_bar_style, can be one of: angled, + #: slanted, or round. + + tab_activity_symbol none + + #: Some text or a unicode symbol to show on the tab if a window in the + #: tab that does not have focus has some activity. If you want to use + #: leading or trailing spaces surround the text with quotes. + + tab_title_template "{title}" + + #: A template to render the tab title. The default just renders the + #: title. If you wish to include the tab-index as well, use something + #: like: {index}: {title}. Useful if you have shortcuts mapped for + #: goto_tab N. If you prefer to see the index as a superscript, use + #: {sup.index}. In addition you can use {layout_name} for the current + #: layout name, {num_windows} for the number of windows in the tab and + #: {num_window_groups} for the number of window groups (not counting + #: overlay windows) in the tab. Note that formatting is done by + #: Python's string formatting machinery, so you can use, for instance, + #: {layout_name[:2].upper()} to show only the first two letters of the + #: layout name, upper-cased. If you want to style the text, you can + #: use styling directives, for example: + #: {fmt.fg.red}red{fmt.fg.default}normal{fmt.bg._00FF00}green + #: bg{fmt.bg.normal}. Similarly, for bold and italic: + #: {fmt.bold}bold{fmt.nobold}normal{fmt.italic}italic{fmt.noitalic}. + + active_tab_title_template none + + #: Template to use for active tabs, if not specified falls back to + #: tab_title_template. + + active_tab_foreground #000 + active_tab_background #eee + active_tab_font_style bold-italic + inactive_tab_foreground #444 + inactive_tab_background #999 + inactive_tab_font_style normal + + #: Tab bar colors and styles + + tab_bar_background none + + #: Background color for the tab bar. Defaults to using the terminal + #: background color. + + #: }}} + + #: Color scheme {{{ +# Dark +background #001e26 +foreground #708183 +cursor #708183 +selection_background #002731 +color0 #002731 +color8 #001e26 +color1 #d01b24 +color9 #bd3612 +color2 #728905 +color10 #465a61 +color3 #a57705 +color11 #52676f +color4 #2075c7 +color12 #708183 +color5 #c61b6e +color13 #5856b9 +color6 #259185 +color14 #81908f +color7 #e9e2cb +color15 #fcf4dc +selection_foreground #001e26 + + #: }}} + + #: }}} + + #: Advanced {{{ + + shell . + + #: The shell program to execute. The default value of . means to use + #: whatever shell is set as the default shell for the current user. + #: Note that on macOS if you change this, you might need to add + #: --login and --interactive to ensure that the shell starts in + #: interactive mode and reads its startup rc files. + + editor . + + #: The terminal editor (such as ``vim`` or ``nano``) to use when + #: editing the kitty config file or similar tasks. + + #: The default value of . means to use the environment variables + #: VISUAL and EDITOR in that order. If these variables aren't set, + #: kitty will run your shell (``$SHELL -l -i -c env``) to see if your + #: shell config files set VISUAL or EDITOR. If that doesn't work, + #: kitty will cycle through various known editors (``vim``, ``emacs``, + #: etc) and take the first one that exists on your system. + + close_on_child_death no + + #: Close the window when the child process (shell) exits. If no (the + #: default), the terminal will remain open when the child exits as + #: long as there are still processes outputting to the terminal (for + #: example disowned or backgrounded processes). If yes, the window + #: will close as soon as the child process exits. Note that setting it + #: to yes means that any background processes still using the terminal + #: can fail silently because their stdout/stderr/stdin no longer work. + + allow_remote_control no + + #: Allow other programs to control kitty. If you turn this on other + #: programs can control all aspects of kitty, including sending text + #: to kitty windows, opening new windows, closing windows, reading the + #: content of windows, etc. Note that this even works over ssh + #: connections. You can chose to either allow any program running + #: within kitty to control it, with yes or only programs that connect + #: to the socket specified with the kitty --listen-on command line + #: option, if you use the value socket-only. The latter is useful if + #: you want to prevent programs running on a remote computer over ssh + #: from controlling kitty. Reloading the config will not affect this + #: setting. + + listen_on none + + #: Tell kitty to listen to the specified unix/tcp socket for remote + #: control connections. Note that this will apply to all kitty + #: instances. It can be overridden by the kitty --listen-on command + #: line flag. This option accepts only UNIX sockets, such as + #: unix:${TEMP}/mykitty or (on Linux) unix:@mykitty. Environment + #: variables are expanded. If {kitty_pid} is present then it is + #: replaced by the PID of the kitty process, otherwise the PID of the + #: kitty process is appended to the value, with a hyphen. This option + #: is ignored unless you also set allow_remote_control to enable + #: remote control. See the help for kitty --listen-on for more + #: details. Changing this option by reloading the config is not + #: supported. + + # env + + #: Specify environment variables to set in all child processes. Note + #: that environment variables are expanded recursively, so if you + #: use:: + + #: env MYVAR1=a + #: env MYVAR2=${MYVAR1}/${HOME}/b + + #: The value of MYVAR2 will be a//b. + + update_check_interval 24 + + #: Periodically check if an update to kitty is available. If an update + #: is found a system notification is displayed informing you of the + #: available update. The default is to check every 24 hrs, set to zero + #: to disable. Changing this option by reloading the config is not + #: supported. + + startup_session none + + #: Path to a session file to use for all kitty instances. Can be + #: overridden by using the kitty --session command line option for + #: individual instances. See + #: https://sw.kovidgoyal.net/kitty/overview/#startup-sessions in the + #: kitty documentation for details. Note that relative paths are + #: interpreted with respect to the kitty config directory. Environment + #: variables in the path are expanded. Changing this option by + #: reloading the config is not supported. + + clipboard_control write-clipboard write-primary + + #: Allow programs running in kitty to read and write from the + #: clipboard. You can control exactly which actions are allowed. The + #: set of possible actions is: write-clipboard read-clipboard write- + #: primary read-primary. The default is to allow writing to the + #: clipboard and primary selection. Note that enabling the read + #: functionality is a security risk as it means that any program, even + #: one running on a remote server via SSH can read your clipboard. + + allow_hyperlinks yes + + #: Process hyperlink (OSC 8) escape sequences. If disabled OSC 8 + #: escape sequences are ignored. Otherwise they become clickable + #: links, that you can click by holding down ctrl+shift and clicking + #: with the mouse. The special value of ``ask`` means that kitty will + #: ask before opening the link. + + term xterm-kitty + + #: The value of the TERM environment variable to set. Changing this + #: can break many terminal programs, only change it if you know what + #: you are doing, not because you read some advice on Stack Overflow + #: to change it. The TERM variable is used by various programs to get + #: information about the capabilities and behavior of the terminal. If + #: you change it, depending on what programs you run, and how + #: different the terminal you are changing it to is, various things + #: from key-presses, to colors, to various advanced features may not + #: work. Changing this option by reloading the config will only affect + #: newly created windows. + + #: }}} + + #: OS specific tweaks {{{ + + wayland_titlebar_color system + + #: Change the color of the kitty window's titlebar on Wayland systems + #: with client side window decorations such as GNOME. A value of + #: system means to use the default system color, a value of background + #: means to use the background color of the currently active window + #: and finally you can use an arbitrary color, such as #12af59 or red. + + macos_titlebar_color system + + #: Change the color of the kitty window's titlebar on macOS. A value + #: of system means to use the default system color, a value of + #: background means to use the background color of the currently + #: active window and finally you can use an arbitrary color, such as + #: #12af59 or red. WARNING: This option works by using a hack, as + #: there is no proper Cocoa API for it. It sets the background color + #: of the entire window and makes the titlebar transparent. As such it + #: is incompatible with background_opacity. If you want to use both, + #: you are probably better off just hiding the titlebar with + + macos_option_as_alt no + + #: Use the option key as an alt key. With this set to no, kitty will + #: use the macOS native Option+Key = unicode character behavior. This + #: will break any Alt+key keyboard shortcuts in your terminal + #: programs, but you can use the macOS unicode input technique. You + #: can use the values: left, right, or both to use only the left, + #: right or both Option keys as Alt, instead. Changing this setting by + #: reloading the config is not supported. + + macos_hide_from_tasks no + + #: Hide the kitty window from running tasks (⌘+Tab) on macOS. Changing + #: this setting by reloading the config is not supported. + + macos_quit_when_last_window_closed no + + #: Have kitty quit when all the top-level windows are closed. By + #: default, kitty will stay running, even with no open windows, as is + #: the expected behavior on macOS. + + macos_window_resizable yes + + #: Disable this if you want kitty top-level (OS) windows to not be + #: resizable on macOS. Changing this setting by reloading the config + #: will only affect newly created windows. + + macos_thicken_font 0 + + #: Draw an extra border around the font with the given width, to + #: increase legibility at small font sizes. For example, a value of + #: 0.75 will result in rendering that looks similar to sub-pixel + #: antialiasing at common font sizes. + + macos_traditional_fullscreen no + + #: Use the traditional full-screen transition, that is faster, but + #: less pretty. + + macos_show_window_title_in all + + #: Show or hide the window title in the macOS window or menu-bar. A + #: value of window will show the title of the currently active window + #: at the top of the macOS window. A value of menubar will show the + #: title of the currently active window in the macOS menu-bar, making + #: use of otherwise wasted space. all will show the title everywhere + #: and none hides the title in the window and the menu-bar. + + macos_custom_beam_cursor no + + #: Enable/disable custom mouse cursor for macOS that is easier to see + #: on both light and dark backgrounds. WARNING: this might make your + #: mouse cursor invisible on dual GPU machines. Changing this setting + #: by reloading the config is not supported. + + linux_display_server auto + + #: Choose between Wayland and X11 backends. By default, an appropriate + #: backend based on the system state is chosen automatically. Set it + #: to x11 or wayland to force the choice. Changing this setting by + #: reloading the config is not supported. + + #: }}} + + #: Keyboard shortcuts {{{ + + #: Keys are identified simply by their lowercase unicode characters. + #: For example: ``a`` for the A key, ``[`` for the left square bracket + #: key, etc. For functional keys, such as ``Enter or Escape`` the + #: names are present at https://sw.kovidgoyal.net/kitty/keyboard- + #: protocol/#functional-key-definitions. For a list of modifier names, + #: see: GLFW mods + + #: On Linux you can also use XKB key names to bind keys that are not + #: supported by GLFW. See XKB keys + #: for a list of key names. The name to use is the part + #: after the XKB_KEY_ prefix. Note that you can only use an XKB key + #: name for keys that are not known as GLFW keys. + + #: Finally, you can use raw system key codes to map keys, again only + #: for keys that are not known as GLFW keys. To see the system key + #: code for a key, start kitty with the kitty --debug-input option. + #: Then kitty will output some debug text for every key event. In that + #: text look for ``native_code`` the value of that becomes the key + #: name in the shortcut. For example: + + #: .. code-block:: none + + #: on_key_input: glfw key: 65 native_code: 0x61 action: PRESS mods: 0x0 text: 'a' + + #: Here, the key name for the A key is 0x61 and you can use it with:: + + #: map ctrl+0x61 something + + #: to map ctrl+a to something. + + #: You can use the special action no_op to unmap a keyboard shortcut + #: that is assigned in the default configuration:: + + #: map kitty_mod+space no_op + + #: You can combine multiple actions to be triggered by a single + #: shortcut, using the syntax below:: + + #: map key combine action1 action2 action3 ... + + #: For example:: + + #: map kitty_mod+e combine : new_window : next_layout + + #: this will create a new window and switch to the next available + #: layout + + #: You can use multi-key shortcuts using the syntax shown below:: + + #: map key1>key2>key3 action + + #: For example:: + + #: map ctrl+f>2 set_font_size 20 + + #: The full list of actions that can be mapped to key presses is + #: available here . + + kitty_mod ctrl+shift + + #: The value of kitty_mod is used as the modifier for all default + #: shortcuts, you can change it in your kitty.conf to change the + #: modifiers for all the default shortcuts. + + clear_all_shortcuts no + + #: You can have kitty remove all shortcut definition seen up to this + #: point. Useful, for instance, to remove the default shortcuts. + + # kitten_alias hints hints --hints-offset=0 + + #: You can create aliases for kitten names, this allows overriding the + #: defaults for kitten options and can also be used to shorten + #: repeated mappings of the same kitten with a specific group of + #: options. For example, the above alias changes the default value of + #: kitty +kitten hints --hints-offset to zero for all mappings, + #: including the builtin ones. + + #: Clipboard {{{ + + map kitty_mod+c copy_to_clipboard + + #: There is also a copy_or_interrupt action that can be optionally + #: mapped to Ctrl+c. It will copy only if there is a selection and + #: send an interrupt otherwise. Similarly, copy_and_clear_or_interrupt + #: will copy and clear the selection or send an interrupt if there is + #: no selection. + + map kitty_mod+v paste_from_clipboard + map kitty_mod+s paste_from_selection + map kitty_mod+o pass_selection_to_program + + #: You can also pass the contents of the current selection to any + #: program using pass_selection_to_program. By default, the system's + #: open program is used, but you can specify your own, the selection + #: will be passed as a command line argument to the program, for + #: example:: + + #: map kitty_mod+o pass_selection_to_program firefox + + #: You can pass the current selection to a terminal program running in + #: a new kitty window, by using the @selection placeholder:: + + #: map kitty_mod+y new_window less @selection + + #: }}} + + #: Scrolling {{{ + + map kitty_mod+up scroll_line_up + map kitty_mod+down scroll_line_down + map kitty_mod+page_up scroll_page_up + map kitty_mod+page_down scroll_page_down + map kitty_mod+home scroll_home + map kitty_mod+end scroll_end + map kitty_mod+h show_scrollback + + #: You can pipe the contents of the current screen + history buffer as + #: STDIN to an arbitrary program using the ``launch`` function. For + #: example, the following opens the scrollback buffer in less in an + #: overlay window:: + + #: map f1 launch --stdin-source=@screen_scrollback --stdin-add-formatting --type=overlay less +G -R + + #: For more details on piping screen and buffer contents to external + #: programs, see launch. + + #: }}} + + #: Window management {{{ + + map kitty_mod+enter new_window + + #: You can open a new window running an arbitrary program, for + #: example:: + + #: map kitty_mod+y launch mutt + + #: You can open a new window with the current working directory set to + #: the working directory of the current window using:: + + #: map ctrl+alt+enter launch --cwd=current + + #: You can open a new window that is allowed to control kitty via the + #: kitty remote control facility by prefixing the command line with @. + #: Any programs running in that window will be allowed to control + #: kitty. For example:: + + #: map ctrl+enter launch --allow-remote-control some_program + + #: You can open a new window next to the currently active window or as + #: the first window, with:: + + #: map ctrl+n launch --location=neighbor some_program + #: map ctrl+f launch --location=first some_program + + #: For more details, see launch. + + map kitty_mod+n new_os_window + + #: Works like new_window above, except that it opens a top level OS + #: kitty window. In particular you can use new_os_window_with_cwd to + #: open a window with the current working directory. + + map kitty_mod+w close_window + map kitty_mod+] next_window + map kitty_mod+[ previous_window + map kitty_mod+f move_window_forward + map kitty_mod+b move_window_backward + map kitty_mod+` move_window_to_top + map kitty_mod+r start_resizing_window + map kitty_mod+1 first_window + map kitty_mod+2 second_window + map kitty_mod+3 third_window + map kitty_mod+4 fourth_window + map kitty_mod+5 fifth_window + map kitty_mod+6 sixth_window + map kitty_mod+7 seventh_window + map kitty_mod+8 eighth_window + map kitty_mod+9 ninth_window + map kitty_mod+0 tenth_window + #: }}} + + #: Tab management {{{ + + map kitty_mod+right next_tab + map kitty_mod+left previous_tab + map kitty_mod+t new_tab + map kitty_mod+q close_tab + map shift+cmd+w close_os_window + map kitty_mod+. move_tab_forward + map kitty_mod+, move_tab_backward + map kitty_mod+alt+t set_tab_title + + #: You can also create shortcuts to go to specific tabs, with 1 being + #: the first tab, 2 the second tab and -1 being the previously active + #: tab, and any number larger than the last tab being the last tab:: + + #: map ctrl+alt+1 goto_tab 1 + #: map ctrl+alt+2 goto_tab 2 + + #: Just as with new_window above, you can also pass the name of + #: arbitrary commands to run when using new_tab and use + #: new_tab_with_cwd. Finally, if you want the new tab to open next to + #: the current tab rather than at the end of the tabs list, use:: + + #: map ctrl+t new_tab !neighbor [optional cmd to run] + #: }}} + + #: Layout management {{{ + + map kitty_mod+l next_layout + + #: You can also create shortcuts to switch to specific layouts:: + + #: map ctrl+alt+t goto_layout tall + #: map ctrl+alt+s goto_layout stack + + #: Similarly, to switch back to the previous layout:: + + #: map ctrl+alt+p last_used_layout + + #: There is also a toggle layout function that switches to the named + #: layout or back to the previous layout if in the named layout. + #: Useful to temporarily "zoom" the active window by switching to the + #: stack layout:: + + #: map ctrl+alt+z toggle_layout stack + #: }}} + + #: Font sizes {{{ + + #: You can change the font size for all top-level kitty OS windows at + #: a time or only the current one. + + map kitty_mod+equal change_font_size all +2.0 + map kitty_mod+minus change_font_size all -2.0 + map kitty_mod+backspace change_font_size all 0 + + #: To setup shortcuts for specific font sizes:: + + #: map kitty_mod+f6 change_font_size all 10.0 + + #: To setup shortcuts to change only the current OS window's font + #: size:: + + #: map kitty_mod+f6 change_font_size current 10.0 + #: }}} + + #: Select and act on visible text {{{ + + #: Use the hints kitten to select text and either pass it to an + #: external program or insert it into the terminal or copy it to the + #: clipboard. + + map kitty_mod+e open_url_with_hints + + #: Open a currently visible URL using the keyboard. The program used + #: to open the URL is specified in open_url_with. + + map kitty_mod+p>f kitten hints --type path --program - + + #: Select a path/filename and insert it into the terminal. Useful, for + #: instance to run git commands on a filename output from a previous + #: git command. + + map kitty_mod+p>shift+f kitten hints --type path + + #: Select a path/filename and open it with the default open program. + + map kitty_mod+p>l kitten hints --type line --program - + + #: Select a line of text and insert it into the terminal. Use for the + #: output of things like: ls -1 + + map kitty_mod+p>w kitten hints --type word --program - + + #: Select words and insert into terminal. + + map kitty_mod+p>h kitten hints --type hash --program - + + #: Select something that looks like a hash and insert it into the + #: terminal. Useful with git, which uses sha1 hashes to identify + #: commits + + map kitty_mod+p>n kitten hints --type linenum + + #: Select something that looks like filename:linenum and open it in + #: vim at the specified line number. + + map kitty_mod+p>y kitten hints --type hyperlink + + #: Select a hyperlink (i.e. a URL that has been marked as such by the + #: terminal program, for example, by ls --hyperlink=auto). + + + #: The hints kitten has many more modes of operation that you can map + #: to different shortcuts. For a full description see kittens/hints. + #: }}} + + #: Miscellaneous {{{ + + map kitty_mod+f11 toggle_fullscreen + map kitty_mod+f10 toggle_maximized + map kitty_mod+u kitten unicode_input + map kitty_mod+f2 edit_config_file + map kitty_mod+escape kitty_shell window + + #: Open the kitty shell in a new window/tab/overlay/os_window to + #: control kitty using commands. + + map kitty_mod+a>m set_background_opacity +0.1 + map kitty_mod+a>l set_background_opacity -0.1 + map kitty_mod+a>1 set_background_opacity 1 + map kitty_mod+a>d set_background_opacity default + map kitty_mod+delete clear_terminal reset active + + #: You can create shortcuts to clear/reset the terminal. For example:: + + #: # Reset the terminal + #: map kitty_mod+f9 clear_terminal reset active + #: # Clear the terminal screen by erasing all contents + #: map kitty_mod+f10 clear_terminal clear active + #: # Clear the terminal scrollback by erasing it + #: map kitty_mod+f11 clear_terminal scrollback active + #: # Scroll the contents of the screen into the scrollback + #: map kitty_mod+f12 clear_terminal scroll active + + #: If you want to operate on all windows instead of just the current + #: one, use all instead of active. + + #: It is also possible to remap Ctrl+L to both scroll the current + #: screen contents into the scrollback buffer and clear the screen, + #: instead of just clearing the screen, for example, for ZSH add the + #: following to ~/.zshrc: + + #: .. code-block:: sh + + #: scroll-and-clear-screen() { + #: printf '\n%.0s' {1..$LINES} + #: zle clear-screen + #: } + #: zle -N scroll-and-clear-screen + #: bindkey '^l' scroll-and-clear-screen + + map kitty_mod+f5 load_config_file + + #: Reload kitty.conf, applying any changes since the last time it was + #: loaded. Note that a handful of settings cannot be dynamically + #: changed and require a full restart of kitty. You can also map a + #: keybinding to load a different config file, for example:: + + #: map f5 load_config /path/to/alternative/kitty.conf + + #: Note that all setting from the original kitty.conf are discarded, + #: in other words the new conf settings *replace* the old ones. + + map kitty_mod+f6 debug_config + + #: Show details about exactly what configuration kitty is running with + #: and its host environment. Useful for debugging issues. + + + #: You can tell kitty to send arbitrary (UTF-8) encoded text to the + #: client program when pressing specified shortcut keys. For example:: + + #: map ctrl+alt+a send_text all Special text + + #: This will send "Special text" when you press the ctrl+alt+a key + #: combination. The text to be sent is a python string literal so you + #: can use escapes like \x1b to send control codes or \u21fb to send + #: unicode characters (or you can just input the unicode characters + #: directly as UTF-8 text). The first argument to send_text is the + #: keyboard modes in which to activate the shortcut. The possible + #: values are normal or application or kitty or a comma separated + #: combination of them. The special keyword all means all modes. The + #: modes normal and application refer to the DECCKM cursor key mode + #: for terminals, and kitty refers to the special kitty extended + #: keyboard protocol. + + #: Another example, that outputs a word and then moves the cursor to + #: the start of the line (same as pressing the Home key):: + + #: map ctrl+alt+a send_text normal Word\x1b[H + #: map ctrl+alt+a send_text application Word\x1bOH + + #: }}} + + #: }}}