ansible-dhcpd/templates/usr/local/lib/dhcp-probe/mail-throttled.j2

#!/usr/bin/perl -w

# {{ ansible_managed }}

# $Header: /usr/local/etc/RCS/mail-throttled,v 1.11 2008/12/06 01:50:28 root Exp $

# mail-throttled [-l] [-D dbm_file] -k key -t throttle_seconds [-f from] -r recipient [-d] [-T tie_attempts_max] [-S tie_retry_sleep] [-s subject]
#
# Sends mail body (read from STDIN) to 'recipient', but avoids doing so "too frequently."
#
# You provide a 'key', which is an arbitrary string used to identify this notification.
# You also provide 'throttle_seconds', an integer.  If we've sent anything that
# specified this 'key' within the last 'throttle_seconds', we do not send the message.
# Otherwise, we send the message, and the remember that we've sent a message for this 'key'
# at the current time.
#
# This key/timesent tuples are stored on-disk, in a dbm.  As a result, the 'key'
# you supply must satisfy the syntactic requirements for dbm keys.  
# The caller needs to have permission to read and write this DBM (and create it if
# it does not already exist).  If you fail to specify a dbm_file, we'll use a default
# value, which may not be what you want (since the caller might not be able to r/w that
# particular DBM).
# We never clean this dbm.  You can safely erase it entirely, if you don't mind losing
# the state, and you know the caller has permission to create a new instance of the DBM.
#
# The 'recipient' should be a valid email address.  Naturally, it should not
# be one that will cause any ack or bounce mail to return to us!
# If there are several addresses (delimited by spaces), be sure to quote them as a single arg.
#
# If a subject is specified, be sure to quote it if it contains any spaces or other shell
# metachars.
#
# If -l is specified, then any errors, warnings, or debugging output is written to syslog
# in addition to its usual destination (STDERR).  This is helpful if you call this from an
# environment where STDERR may get lost.
#
# Irwin Tillman

use Getopt::Std;
use GDBM_File;
use Errno qw(EAGAIN);
use Sys::Syslog qw(:DEFAULT setlogsock);

use strict;
use warnings;

use vars qw($DBM_FILE_DEFAULT $MAILCMD $MAILCMD_OPTS $FROM_DEFAULT);
$DBM_FILE_DEFAULT = '{{ ansible_local.root.lib + "/dhcp-probe/mail-throttled.gdbm" }}';
$MAILCMD = "/usr/lib/sendmail";
# $MAILCMD_OPTS = "-t -ODeliveryMode=queueonly";
$MAILCMD_OPTS = "-t";
$FROM_DEFAULT = "root";

my $SYSLOG_FACILITY="daemon";                   # name of facility to use if syslogging
my $SYSLOG_OPT = 'pid,cons';                    # syslog options to use if syslogging, ignored otherwise
my $SYSLOG_PRIORITY = 'LOG_ERR';

# The tie() call sometimes fails with EAGAIN.
# Perhaps that's due to some other process having the DBM open;
# in fact, that may be more likely if the process that calls us may calls us multiple times in quick succession.
# So when tie() fails with EAGAIN, we can sleep and retry some number of times before giving up entirely.
my $TIE_ATTEMPTS_MAX = 3;	#  number of times to try tie() before giving up
my $TIE_RETRY_SLEEP = 1;	#  seconds to sleep before retrying tie()

(my $prog = $0) =~ s/.*\///;

use vars qw($opt_f $opt_D $opt_d $opt_k $opt_l $opt_r $opt_s $opt_S $opt_t $opt_T);
&getopts('dD:f:k:lr:s:S:t:T:');

my $debug = $opt_d || "";
my $dbm_file = $opt_D || $DBM_FILE_DEFAULT;
my $key = $opt_k || "";
my $from = $opt_f || $FROM_DEFAULT;
my $recipient = $opt_r || "";
my $throttle_secs = $opt_t || 1;
my $subject = $opt_s || "";
my $also_syslog = $opt_l || "";
my $tie_attempts_max = $opt_T || $TIE_ATTEMPTS_MAX; # we deliberately override if CLI option specifies 0, as that makes no sense
my $tie_retry_sleep = $opt_S || $TIE_RETRY_SLEEP;

if ($also_syslog) {
	# init our use of syslog
	# setlogsock('unix'); # talk to syslog with UNIX domain socket, not INET domain. XXX causes failure in Solaris 7
	openlog($prog, $SYSLOG_OPT, $SYSLOG_FACILITY);
}

my_warn("${prog}:\nkey=$key\nthrottle_secs=$throttle_secs\nfrom=$from\nrecipient=$recipient\ntie_attempts_max=$tie_attempts_max\ntie_retry_sleep=$tie_retry_sleep\nsubject=$subject") if $debug;

# certain options and args are required
&Usage() unless ($key && $throttle_secs && $recipient);

my %last_sent = ();
my $tie_succeeded = 0;
my $tie_attempts_left = $TIE_ATTEMPTS_MAX;

while ($tie_attempts_left--) {
	if (tie(%last_sent, 'GDBM_File', $dbm_file, &GDBM_WRCREAT, 0644)) {
		$tie_succeeded = 1;
		last;
	}
	# the tie() failed

	if ($! == EAGAIN) {
		# The failure may be due to a transient problem.
		# Retrying may help.
		sleep $TIE_RETRY_SLEEP;
		next;

	} else {
		# Some other (presumably more serious) error.
		last;
	}
}
unless ($tie_succeeded) {
	my_warn("${prog}: can't tie ${dbm_file}: $!");
	exit 10;
}

my @mailbody = "";
@mailbody = <STDIN>; # read it even if we decide not to send it

my $now = time;

my_warn("now = $now") if $debug;

$last_sent{$key} = 0 unless defined($last_sent{$key}); # so it's defined before we use it in subtraction (placate use strict)

if ($now - $last_sent{$key} >= $throttle_secs) {
	my_warn("last_sent = $last_sent{$key}, will send") if $debug;
	unless (open(MAIL, "| $MAILCMD $MAILCMD_OPTS -f\"$from\"")) {
		my_warn("${prog}: error executing '${MAILCMD}': open(): $!");
		exit 20;
	}
	print MAIL	"From: $from\n",
				"To: $recipient\n",
				($subject ? "Subject: $subject\n" : "") ,
				"\n",
				@mailbody;
	unless (close(MAIL)) {
		my_warn("${prog}: error executing '${MAILCMD}': close(): " .
			($! ?
				"syserror closing pipe: $!"
				:
				"wait status $? from pipe"
			)
		);
		exit 21;
	}

	$last_sent{$key} = $now;
} else {
	my_warn("last_sent = $last_sent{$key}, suppressing") if $debug;
}

untie %last_sent;

exit 0;



sub Usage {
	my_warn("Usage: $prog [-l] [-D dbm_file] -k key -t throttle_seconds [-f from] -r recipient [-T tie_attempts_max] [-S tie_retry_sleep] [-s subject]");
	exit 1;
}


sub my_warn {
	# Just a wrapper for warn, but with a possible copy to syslog too.
	my $msg = shift;
	warn $msg, "\n";
	syslog($SYSLOG_PRIORITY, $msg) if $also_syslog;
	return;
}